轻工机械2011，Vol.29Issue(4)：40-42,3.DOI:10.3969/j.issn.1005-2895.2011.04.010
基于DEFORM-3D的不锈钢切削力有限元仿真
FEA of Cutting Force of Stainless Steel Based on DEFORM-3D
章振翔 1张金明 1王来钱1
作者信息
- 1. 浙江工业大学车辆工程研究所,浙江杭州310014
- 折叠
摘要
Abstract
In order to improve the research on metal cutting process, DEF0RM-3D was used as a platform, and the cutting process of OCrl8Ni9 stainless steel was modeled and simulated by FEA, finally the change law of the cutting force ofOCr\SNi9 stainless steel and the influence made by cutting speed and feed were analyzed, and the simulation data were made contrast with calculation data. The results show that the simulation data got by DEFORM-3D have a relatively high inosculation with the calculation data, which means simulation dada has a relatively high level of reliability. It provides a new way to systematically investigate the metal cutting process.关键词
切削加工/DEFORM-3D软件/有限元仿真/切削力Key words
cutting process/DEFORM-3D/finite element analysis/cutting force分类
通用工业技术引用本文复制引用
章振翔,张金明,王来钱..基于DEFORM-3D的不锈钢切削力有限元仿真[J].轻工机械,2011,29(4):40-42,3.
