石油化工高等学校学报2011，Vol.24Issue(3)：75-78,4.DOI:10.3696/j.issn.1006-396X.2011.03.018
水下跨接管连接器选型设计研究
Selection and Design of Jumper Connector
摘要
Abstract
Jumper spools with connectors are widely used in subsea devices installations during offshore oil and gas fields exploration, and can be operated by horizontal tie-in system or vertical tie-in system. Mechanical collet connector, hydraulic collet connector, and clamp connector are the most common selection in subsea jumper spools connection. Mechanical collet connector is compactive, and leaves no hydraulic components subsea, but connector actuation tools is needed in operation. Hydraulic collet connector is operated directly from the ROV, and with no need for a dedicated actuating tool. Clamp connectors consist of a two piece segmented clamp design and are particularly well suited for larger bore, lower pressure horizontal connection applications. Different connector types and different tie- in manners demand different installation process and different tools. Diameter, tie - in manner, and tools should be considered carefully in the connetor selection of jumper spool.关键词
跨接管；连接器/机械式套筒连接器；液压式套筒连接器；夹钳连接器Key words
Jumper spool/ Connectors Mechanical collet connector/ Hydraulic collet connector/ Clamp connector分类
化学化工引用本文复制引用
周灿丰,焦向东,曹静,沙勇,房晓明..水下跨接管连接器选型设计研究[J].石油化工高等学校学报,2011,24(3):75-78,4.基金项目
中国海洋石油总公司综合科研项目(CNOOCRC-2009-ZHKY-015)；北京市属高等学校人才强教计划资助项目(PHR201007134)。 （CNOOCRC-2009-ZHKY-015）
