江苏大学学报（自然科学版）2011，Vol.32Issue(4)：400-404,5.DOI:10.3969/j.issn.1671-7775.2011.04.006
高扬程深井离心泵的正交试验与优化设计
Orthogonal test and optimization design of high-head deep-well centrifugal pump
摘要
Abstract
In order to develop high head and high efficiency deep-well centrifugal pump, 100QJ10 deep-well centrifugal pump was taken as an example. The orthogonal experiment of L9 (34 ) , which contains factors with three levels of outlet angle, outlet width, outside diameter of impeller back shroud, etc, was performed to design nine types of impellers. According to standard k -ε model, SIMPLEC algorithm, second-order upwind scheme which were deduced from Fluent, the whole flow field of new type two-stage deep-well centrifugal pump at the operating point was numerically simulated. Nine groups of efficiency and head for design scheme were obtained at rated condition. The effects of geometrical parameters on efficiency and head were discussed by Latin square test method. The primary and secondary factors of the design parameters were acquired by variance analysis. According to the test results, an optimum program for further design was proposed. The test of pump prototype shows that the efficiency of optimal design model pump can reach 58.41% with single-stage head of 5. 2 m at rated condition. The improved efficiency and head can meet the design requirements.关键词
深井离心泵/正交试验/数值模拟/叶轮/单级扬程Key words
deep-well centrifugal pump/ orthogonal test/ numerical simulation/ impeller/ single-stage head分类
机械制造引用本文复制引用
施卫东,周岭,陆伟刚,张丽,王川..高扬程深井离心泵的正交试验与优化设计[J].江苏大学学报（自然科学版）,2011,32(4):400-404,5.基金项目
国家科技人员服务企业行动项目(2009GJC30002) （2009GJC30002）
江苏省高等学校优秀科技创新团队计划项目(苏教科[2009]10号) （苏教科[2009]10号）
