可再生能源2011，Vol.29Issue(4)：58-60,3.
微生物燃料电池电极烧结工艺研究
Research on microbial fuel cell electrodes sintering process
刘庆玉 1李锦生 1李金洋 1陈涛1
作者信息
- 1. 沈阳农业大学工程学院,辽宁沈阳110866
- 折叠
摘要
Abstract
Based on particles of activated carbon and flexible graphite as raw materials, polyte-trafluoroethylene (PTFE) for binder, microbial fuel cell electrodes were made. While suppress test and sintering experiment proceed,intensity、 hydrophilic、electric conductivity and porosity of sintering electrode were discussed,and the optimal conditions were obtained:the concentration of PTFE was 30%, the ratio of PTFE to ethanol was 4:1, the temperature of sintering was 380 ℃, insulation for 4 h, the heating-up temperature was 80 ℃/h below 200 ℃, otherwise 60 ℃/h above 200 ℃, temperature decreased with furnace cooling.关键词
电极/聚四氟乙烯(PTFE)/烧结/工艺条件Key words
electrode/Polytetraflubroethylene(PTFE)/sintering/process conditions分类
能源科技引用本文复制引用
刘庆玉,李锦生,李金洋,陈涛..微生物燃料电池电极烧结工艺研究[J].可再生能源,2011,29(4):58-60,3.
