| 注册
首页|期刊导航|计算机工程与应用|螺旋弹簧冷绕成形与回弹的数值分析

螺旋弹簧冷绕成形与回弹的数值分析

雷松 王时龙 冯治恒 萧红 李小勇

计算机工程与应用2011,Vol.47Issue(27):228-232,5.
计算机工程与应用2011,Vol.47Issue(27):228-232,5.DOI:10.3778/j.issn.1002-8331.2011.27.062

螺旋弹簧冷绕成形与回弹的数值分析

Numerical analysis of cold coiling and springback for helical springs

雷松 1王时龙 1冯治恒 1萧红 1李小勇1

作者信息

  • 1. 重庆大学机械传动国家重点实验室,重庆400030
  • 折叠

摘要

Abstract

The various parameters in the cold coiling process of helical springs produce great effect on the springback of the springs.Through the analysis of cold coiling and springback processes of helical springs, the finite element computing models of that are established by employing the large non-linear finite element analytical software ABAQUS 6.8.The influences of different values of tensile force,different ratios of the mandrel diameter to the spring wire diameter,and different pitches in the forming process,to the springback respectively and the displacement changes of each node in the medium diameter after the springback are calculated.The simulation analysis shows that the values of tensile force have an important effect on the springback.The larger the values of tensile force,the smaller the springback are.In the condition, the stress of the spring wire is more stable and larger, with the greater proportion of the plastic region in the cross-section of that.For the spring wire with a certain diameter,the larger the mandrel diameter,that is,the greater the ratio of the mandrel diameter to the spring wire diameter,the larger the springback is.When the mandrel diameter is certain,the smaller the spring wire diameter, the fewer the amounts of springback are, with greater stress in the cross-section.On the other hand, when the forming pitch is greater, the stress of spring wire is more instable and the average stress is smaller, with the larger and more insta-ble springback.The medium diameter and pitch of spring increase evidently after the springback, and the stress of spring decreases gradually from the joint of chuck in the springback process.

关键词

螺旋弹簧/冷绕成形/回弹/数值分析

Key words

helical springs/cold coiling/springback/numerical analysis

分类

机械制造

引用本文复制引用

雷松,王时龙,冯治恒,萧红,李小勇..螺旋弹簧冷绕成形与回弹的数值分析[J].计算机工程与应用,2011,47(27):228-232,5.

基金项目

国家杰出青年科学基金资助项目(No.50925518) (No.50925518)

国家自然科学基金资助项目(No.50775226) (No.50775226)

教育部科学技术研究重点项目(No.109129) (No.109129)

重庆市科技攻关计划项目(No.CSTC2009AC3049) (No.CSTC2009AC3049)

重庆大学研究生科技创新基金(No.200911A1A0020318) (No.200911A1A0020318)

重庆大学“211工程”三期创新人才培养计划建设项目(No.S-09106). (No.S-09106)

计算机工程与应用

OACSCDCSTPCD

1002-8331

访问量0
|
下载量0
段落导航相关论文