电焊机2011，Vol.41Issue(9)：81-84,4.
基于Proteus的焊接电源人机交互系统设计
Design of welding power source man-machine interaction system based on Proteus
摘要
Abstract
This paper introduces the features of welding power source man-machine interaction system,which uses two-processor of DSP and MCU to achieve a digital welding power source.An STC89C52 MCU based on man-machine interaction system,which was designed,programmed,simulated and debugged by using Proteus and Keil.The user can set parameter,such as welding current, welding voltage and welding speed, besides also have realtime data display function by man-machine interface.Results verify that the design requirements of two-processor welding power source was met by this designed system,which have features of high-availability, friendly interface and easy operation.This method is provided a basis of the following actual hardware design,which reduces the cycle time and save costs.关键词
Proteus/DSP/人机交互/单片机Key words
proteus/DSP/man-machine interaction/MCU分类
矿业与冶金引用本文复制引用
王春,廖映华,张良栋,刘明..基于Proteus的焊接电源人机交互系统设计[J].电焊机,2011,41(9):81-84,4.基金项目
过程装备及控制工程四川省高校重点实验室基金资助项日(GK201001) （GK201001）
四川理工学院人才引进科研启动项目(2010XJKRL012) （2010XJKRL012）
