流体机械2011，Vol.39Issue(7)：22-25,59,5.DOI:10.3969/j.issn.1005-0329.2011.07.005
核电泵用机械密封摩擦有限元分析
Finite Element Analysis of Nuclear Power Pump Mechanical Seal Friction
雷雯 1王伟 2闻永华2
作者信息
- 1. 海军驻湖南地区军事代表室,湖南长沙410007
- 2. 江苏华青流体科技有限公司,江苏张家港215633
- 折叠
摘要
Abstract
The different conditions of mechanical seal ring as the research object, based on the contact surface temperature, on various conditions of seal contact status and temperature change trend are analysed. The results showed that: under extreme conditions, the mechanical seal ring temperature is far less than the corresponding material allows the use of the cap; in normal working condition, the sealing ring due to friction caused by Wen Sheng small, by the sealing medium is transmitted into the sealing ring heat caused by Wen Sheng large. Mechanical seal in different medium temperature and different sealing under pressure can guarantee good performance. In extreme cases, seal ring Mises equivalent stress at the lower level, does not lead to the failure of sealing ring. Because the sealing pressure effect caused by the seal face deformation, seal liquid film thickness along the direction of pressure drop is a divergent distribution; in the end the outside diameter of dynamic and static rings will generate local contact wear, sealing medium temperature on the end surface of liquid film thickness effect.关键词
机械密封/有限元软件分析/温度场/应力应变Key words
mechanical seal software of finite element analysis of temperature field and stress strain分类
机械制造引用本文复制引用
雷雯,王伟,闻永华..核电泵用机械密封摩擦有限元分析[J].流体机械,2011,39(7):22-25,59,5.
