重型机械Issue(6)：27-30,4.
连铸拉矫机强度分析和冷却水系统研究
Strength analysis of withdrawal straightener for CCM and study on cooling water system
夏龙伟 1黄森炎 1刘波 1万宇轩1
作者信息
- 1. 中钢集团衡阳重机有限公司,湖南,衡阳,421002
- 折叠
摘要
Abstract
In view of straightener for small billet (R9 m, 170 ±30 mm section) CCM, Solidworks Cosmo-sworks finite element analytical plugin is adoopted to calibrate structural strength of the withdrawal straightener, and further optimization for the withdrawal straightener is implemented. Solidworks Cosmosfloworks fluid plugin is used to conduct the flow and heat exchange simulation for the cooling water system in the withdrawal straightener The method eliminated the phenomena of stagnant water and the small flow flux of cooling-water system, reduced the testing cost at the greatest extent, and improved the quality of products.关键词
拉矫机/强度/冷却水/流动/热交换Key words
withdrawal straightener/strength calibration/cooling water/flow and heat exchange simulation分类
矿业与冶金引用本文复制引用
夏龙伟,黄森炎,刘波,万宇轩..连铸拉矫机强度分析和冷却水系统研究[J].重型机械,2011,(6):27-30,4.
