农业机械学报2011，Vol.42Issue(3)：224-228,5.
面向单点渐进成形工艺的成形路径生成方法
Tool-path Generation Method for Single Point Incremental Forming
摘要
Abstract
On the basis of characteristic analysis for the single point incremental forming ( SPIF) , the problems of current study of tool-path generation for SPIF process were proposed. Based on the proposed method, a new tool-path generation method for SPIF, and the suitable Z-constant tool-path generation were presented. This method was used in the specific process planning software AFS2, and was applied to the SPIF equipment developed by the Japanese Amino Corporation, and an excellent surface quality was gained in a forming practice. Finite element analysis and application results indicate that the proposed method is feasible to meet practical needs.关键词
单点渐进成形/成形路径/干涉检测/有限元分析Key words
Single point incremental forming/ Forming tool-path/ Interference detection/ Finite element analysis分类
矿业与冶金引用本文复制引用
李敏,张李超,莫健华,袁学忠..面向单点渐进成形工艺的成形路径生成方法[J].农业机械学报,2011,42(3):224-228,5.基金项目
国家自然科学基金资助项目(50175034、50875093) （50175034、50875093）
