电测与仪表2011，Vol.48Issue(10)：34-37,4.
基于以太网的配电变压器监测终端设计
The Design of Transformer Terminal Unit Based on Ethernet
陶维青 1王大亮 2李林 1何刚 2陈鑫2
作者信息
- 1. 合肥工业大学电气与自动化工程学院,合肥230009
- 2. 科大智能科技股份有限公司,合肥230088
- 折叠
摘要
Abstract
With the development of market economy, consumers put forward higher requirements about power quality and supply reliability. Since distribution transformer is the most important electric power equipment in the distribution network, whose degree of automation will directly reflect the level of the distribution automation. This paper introduces a new multifunction transformer terminal unit based on a MSP430F5438, which is a 16 bit low power consumption flash type microcontroller and an Ethernet chip W5100. This terminal uses the technique of the Ethernet communication to realize remote data transmission and monitor the distribution network parameter and status. This paper also emphasizes on the hardware components, software flow, data collection of this terminal and the methods of Ethernet communication which makes it easier to operate the terminal via Ethernet communication.关键词
配电变压器监测终端/MSP430F5438/以太网通信/数据采集Key words
TTU, MSP430F5438, ethernet communication, data collection分类
信息技术与安全科学引用本文复制引用
陶维青,王大亮,李林,何刚,陈鑫..基于以太网的配电变压器监测终端设计[J].电测与仪表,2011,48(10):34-37,4.
