玻璃钢/复合材料Issue(6)：57-59,19,4.
复合材料进气道的模具设计及工艺方案研究
STUDY ON MOULD DESIGN AND PROCESS PLAN OF THE COMPOSITE INLET DUCT
杨铁江 1张明 1张剑1
作者信息
- 1. 西北工业大学第365研究所,西安 710072
- 折叠
摘要
Abstract
In this thesis, metal mould plan, balloon mould plan and water-solubility mould plan were researched. Based on the research, the complex surface composite mould-designing technology and forming process plan were studied, then the water-solubility mould plan was determined as the only plan to form the complex surface composite inlet duct, and the forming process plan was developed. Based on these two plans, the inlet duct had been made and it had met the product design requirement. At last, the mould-designing and the forming process plan gave an reference on complex surface composite product forming.关键词
复合材料/进气道/水溶性/模具设计/工艺方案Key words
composite/inlet duct/water-solubility/mould design/forming process plan引用本文复制引用
杨铁江,张明,张剑..复合材料进气道的模具设计及工艺方案研究[J].玻璃钢/复合材料,2011,(6):57-59,19,4.
