爆炸与冲击2011，Vol.31Issue(5)：557-560,4.
爆炸复合1Cr13Mo/45钢连铸辊工艺
An explosive clad technology for 1Cr13Mo/45 steel conticaster rollers
赵峰 1马东康 1王虎年 1张鹏辉 1李进军 1华先锋1
作者信息
- 1. 西安天力金属复合材料有限公司,陕西西安710054
- 折叠
摘要
Abstract
1Cr13Mo/45 steel clad conticaster rollers were prepared by using an explosive cald method to explore the explosive clad technique, and the ultrasonic scan test and metallograph were used to research the effect of the explosive thickness and stand-off on the clad rollers. Investigated results show that the stand-off has observable effect on the interface wave when the explosive thickness is fixed, but when the stand-off is fixed, the explosive thickness has little effect on the interface wave. Finally, a better explosive process was experimentally obtained to manufacture 1Cr13Mo/45 steel clad rollers.关键词
爆炸力学/1Cr13Mo/45钢复合轧辊/爆炸复合/爆炸复合工艺/连铸辊/界面波形/间隙Key words
mechanics of explosion/ 1Cr13Mo/45 steel clad conticaster roller/ explosive cald/ explosive clad technology/ interface wave/ stand-off分类
数理科学引用本文复制引用
赵峰,马东康,王虎年,张鹏辉,李进军,华先锋..爆炸复合1Cr13Mo/45钢连铸辊工艺[J].爆炸与冲击,2011,31(5):557-560,4.
