电焊机2012，Vol.42Issue(2)：66-69,4.
轧辊表面光纤激光毛化工艺研究
Study on fiber laser surface texturing technology for the roller
张瑞华 1韩帅 1梁海娇 1李宝磊 1尹燕 1张岩2
作者信息
- 1. 兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,甘肃兰州730050
- 2. 新冶高科技集团有限公司,北京100081
- 折叠
摘要
Abstract
By the use of fiber laser flexible workstation.it was studied how laser focus head posture and side-blown angle affect surface topography and textured surface roughness of roller,the influencing rule was analyzed,furthermore,the optimum texturing technology was summed up.The results showed that,with texturing spots distribution relatively independent and convex platform metal distribution centralized,in addition,without lap phenomenon among spots,the surface topography at specific side-blown angles in the position of 12 and 3 could meet requirement; the surface roughness could meet requirement at any side-blown angle in the position of 12 and 9. Taking into consideration both requirements of surface topography and textured roughness,the texturing result at position 12 was better than that of position 3.The results have been applied to actual production.关键词
轧辊/光纤激光/毛化/形貌/粗糙度Key words
roller/fiber laser/texturing/surface topography/roughness分类
矿业与冶金引用本文复制引用
张瑞华,韩帅,梁海娇,李宝磊,尹燕,张岩..轧辊表面光纤激光毛化工艺研究[J].电焊机,2012,42(2):66-69,4.
