高电压技术2012，Vol.38Issue(1)：59-65,7.
GIS中典型局放缺陷的UHF信号与放电量的相关分析
Relationship Between UHF Signals and Discharge Magnitude from Typical Partial Discharge Defects in GIS
摘要
Abstract
Relationship between UHF signals and discharge magnitude is a difficult problem in partial discharge UHF detecting.In order to analyze the relationship between the testing results by the UHF method and the parameter by pulse current method,we compared the relationship between quantities and discharge magnitude of the UHF signal energy,quadratic integral,peak voltage,peak-to-peak value,and wave area from four typical defect models of partial discharge.Conclusions can be drawn that the highest coefficient of determination exists in the signal energy of UHF and the square discharge magnitude,while the best regression curve exists in the signal parameter of UHF and the discharge magnitude can be attained as well.The results can be used as references and guides for calibration of the PD UHF signal of the interior of electric device.关键词
超高频（UHF）法/脉冲电流法/气体绝缘组合电器（GIS）/局部放电（PD）/放电量/信号能量Key words
ultra high frequency（UHF） method/pulse current method/gas insulated switchgear（GIS）/partial discharge（PD）/discharge magnitude/signal energy分类
信息技术与安全科学引用本文复制引用
张晓星,唐俊忠,唐炬,骆杨,谢颜斌..GIS中典型局放缺陷的UHF信号与放电量的相关分析[J].高电压技术,2012,38(1):59-65,7.基金项目
国家重点基础研究发展计划（973计划） （）
国家自然科学基金 （）
