金刚石与磨料磨具工程2011，Vol.31Issue(5)：30-34,5.DOI:10.3969/j.issn.1006-852X.2011.05.007
电镀工艺参数对金刚石锯丝复合镀层质量影响研究
Study on influences of electroplating process parameters on composite coating quality of diamond wire saw
摘要
Abstract
Electroplated diamond wire saw was prepared using composite plating method. The influence of cathode current density as well as the plating duration for diamond grits embedding and plating upon the wire surface quality, diamond grits density and embedded depth was analyzed. The results indicated that, when the diamond grits to be fixed was 20 μm, reasonable cathode current density for both embedding and plating was 2.0 A/m2, while the corresponding embedding and plating duration was 7 min and 18 min , respectively. The wire saws manufactured under these technical parameters showed good surface quality, uniform distribution density and ideal embedded depth .关键词
金刚石锯丝/复合镀层/工艺参数Key words
diamond wire saw/ compound coating/ process parameters分类
化学化工引用本文复制引用
高玉飞,葛培琪..电镀工艺参数对金刚石锯丝复合镀层质量影响研究[J].金刚石与磨料磨具工程,2011,31(5):30-34,5.基金项目
国家自然科学基金资助项目(51075240) （51075240）
中国博士后科学基金资助项目(20100481257) （20100481257）
山东大学自主创新基金资助项目(2010JC012,2010GN051) （2010JC012,2010GN051）
