金刚石与磨料磨具工程2011，Vol.31Issue(5)：51-55,5.DOI:10.3969/j.issn.1006-852X.2011.05.012
青铜结合剂金刚石砂轮胎体性能评价的研究(1)——胎体金相分析
Performance assessment of the matrix of bronze-bonded diamond grinding wheel( 1 ) : metallographic analysis
摘要
Abstract
Several groups of bronze-bonded matrix samples were designed and sintered in different process conditions. The phase composition and microstructure of the samples were analyzed using X-ray diffraction analysis, backscattered electron imaging technology and X-ray energy spectrum analysis. With the above test results, the morphology properties of different metallographic figures were figured out, and corresponding micro hardness was tested. At last, the sintering mechanism was analyzed.关键词
青铜结合剂金刚石砂轮/胎体/性能评价/金相分析Key words
bronze-bonded diamond wheel/ matrix/ performance assessment/ metallographic analysis分类
矿业与冶金引用本文复制引用
段隆臣,徐少林,李俊萍..青铜结合剂金刚石砂轮胎体性能评价的研究(1)——胎体金相分析[J].金刚石与磨料磨具工程,2011,31(5):51-55,5.基金项目
科技部中国-乌克兰国际合作(项目编号No.2008 DFR70510) （项目编号No.2008 DFR70510）
深圳市常兴金刚石磨具有限公司项目(KH106055)资助. （KH106055）
