金刚石与磨料磨具工程2011，Vol.31Issue(6)：29-32,37,5.
电镀cBN砂轮高速磨削高温合金的砂轮磨损研究
Wear of electroplated cBN wheels in high speed grinding of superalloy
摘要
Abstract
High speed grinding experiments on GH4169 superalloy were carried out at 120 m/s to study the wear of electroplated cBN wheels. Replication method was used to observe the wear process of the grinding wheel, and the corresponding grinding force was also analyzed. The results revealed that the grinding force showed a steady rising trend after rapid increasing in the initial stage, the gap between normal force of down grinding and up grinding increases gradually with the increase of accumulated wheel wear. In particular, the main wear form of cBN wheel is abrasion under the conditions such as wheel speed 120 m/s, the volume of material removal of wokpiece 3 m / (mm · s).关键词
高速磨削/电镀cBN砂轮/砂轮磨损/高温合金Key words
high speed grinding/ electroplated cBN wheel/ wear/ superalloy分类
矿业与冶金引用本文复制引用
李峰,苏宏华,丁文锋,张志伟..电镀cBN砂轮高速磨削高温合金的砂轮磨损研究[J].金刚石与磨料磨具工程,2011,31(6):29-32,37,5.基金项目
国家973计划(2009CB724403). （2009CB724403）
