现代制造工程Issue(11)：12-16,5.
Incone1718镍基高温合金的切削性能仿真
The cutting simulation of Inconel718
摘要
Abstract
The chemical composition and properties of nickel-based superalloy Inconel718 was investigated first. Turning In-conel718 was simulated by Deform-3D software to figure out main affection factors,and optimal combination of cutting speed,feed rate and cutting depth was introduced. In addition, different cooling and lubrication methods (heat transfer coefficient of cooling and tool-chip friction factors) for cutting of Inconel718 was studied,and a best cooling and lubrication mode was obtained.The chemical composition and properties of nickel-based superalloy Inconel718 was investigated first. Turning In-conel718 was simulated by Deform-3D software to figure out main affection factors,and optimal combination of cutting speed,feed rate and cutting depth was introduced. In addition, different cooling and lubrication methods (heat transfer coefficient of cooling and tool-chip friction factors) for cutting of Inconel718 was studied,and a best cooling and lubrication mode was obtained.关键词
Inconel718镍基高温合金/切削性能/Deform-3D软件/仿真Key words
Inconel718/cutting characteristic/Deform-3D/simulation分类
机械制造引用本文复制引用
任和,任家隆,郑庆余,张春燕..Incone1718镍基高温合金的切削性能仿真[J].现代制造工程,2011,(11):12-16,5.基金项目
国家自然科学基金资助项目(50845064) （50845064）
