机械科学与技术2011，Vol.30Issue(9)：1443-1445,3.
基于Fluent连杆模具电解加工过程的三维流场分析
Fluent Based Numerical Simulation of Three-dimensional Flow Field of Electrochemical Machining for a Connecting Rod Mold
武立胜 1吕新生 1张晔 1陈远龙2
作者信息
- 1. 合肥工业大学机械CAD／CAM研究中心,合肥230009
- 2. 合肥工业大学特种加工研究所,合肥230009
- 折叠
摘要
Abstract
On the basis of analyzing the flow field of a connecting rod mold used in electrochemical machining,a three-dimensional physical model of the flow passage was constructed.According to the turbulent state of the fluid flow in electrochemical machining and by considering the influence of air bubble,the three-dimensional flow field was simulated with a two-phase mixture model.Comparing the simulation results with the experimental ones,it is indicated that the CFD simulation is practicable for guiding the design of the cathode.关键词
电解加工/三维流场/连杆模具/数值模拟Key words
electrochemical machining/three-dimensional flow field/connecting rod mold/numerical simulation分类
矿业与冶金引用本文复制引用
武立胜,吕新生,张晔,陈远龙..基于Fluent连杆模具电解加工过程的三维流场分析[J].机械科学与技术,2011,30(9):1443-1445,3.
