河南理工大学学报：自然科学版2011，Vol.30Issue(5)：577-580,4.
超声振动铣削碳纤维复合材料铣削力的试验研究
Research on the milling force in ultrasonic vibration milling of CFRP
摘要
Abstract
This paper used multivariate orthogonal experimental method of carbon fiber composite materials for ultrasound milling and common milling processing experiment, research in different cutting parameters of the materials under the change rule of milling force. This experimental measurement used Kistler dynamometer, the regulation of the milling force influenced by the spindle speed, the feed rate and the cutting depth obtained. The experimental results show that milling forces which after ultrasound milling and common milling increases as the spindle speed increases, the feed rate increases and the cutting depth increases. But milling force of ultrasound milling is less than common milling.关键词
超声振动铣削/碳纤维复合材料/铣削力/Kistler测力仪Key words
carbon fibred reinforced polymer/ultrasonic vibration milling/milling force/Kistler dynamometer分类
金属材料引用本文复制引用
席青祥..超声振动铣削碳纤维复合材料铣削力的试验研究[J].河南理工大学学报：自然科学版,2011,30(5):577-580,4.基金项目
国家自然科学基金资助项目50975080. （）
