| 注册
首页|期刊导航|中国石油大学学报(自然科学版)|渤海油田早期聚合物驱动态规律及见效时间判断方法

渤海油田早期聚合物驱动态规律及见效时间判断方法

姜汉桥 郑伟 张贤松 何春百 陈民锋 陈付真 胡庆贺

中国石油大学学报(自然科学版)2011,Vol.35Issue(6):95-98,111,5.
中国石油大学学报(自然科学版)2011,Vol.35Issue(6):95-98,111,5.DOI:10.3969/j.issn.1673-5005.2011.06.015

渤海油田早期聚合物驱动态规律及见效时间判断方法

Dynamic law and method of judging effective time of early polymer flooding in Bohai Oilfield

姜汉桥 1郑伟 1张贤松 2何春百 2陈民锋 1陈付真 1胡庆贺3

作者信息

  • 1. 中国石油大学石油工程教育部重点实验室,北京102249
  • 2. 中海石油研究中心,北京100027
  • 3. 中国石油长城钻探工程公司地质研究院,辽宁盘锦124010
  • 折叠

摘要

Abstract

A typical model was constructed based on data in Bohai Oilfield, and the variation laws of water cut and oil production rate with different polymer injection time were studied. The definition of dimensionless effective time was proposed to judge the effective time of early polymer flooding. And the influences of polymer injection time, coefficient of variation and mobility ratio on the dimensionless effective time were analyzed. The judgement standard of effective time for polymer flooding with different polymer injection time was proposed. The results show that early polymer flooding exists a critical injection time, and if injection time is greater than the critical value, water cut curve would have significant decrease funnel, if less, it would not show decrease funnel. So the appearance of decrease funnel could not be the only standard to determine the effective time. The model was tested based on the available production data, and the relative error is about less than 10% , which can meet the engineering precision demands.

关键词

渤海油田/聚合物/注聚合物时机/含水率变化形态/无因次见效时间

Key words

Bohai Oilfield/polymers/polymer injection time/water cut change shape/dimensionless effective time

分类

能源科技

引用本文复制引用

姜汉桥,郑伟,张贤松,何春百,陈民锋,陈付真,胡庆贺..渤海油田早期聚合物驱动态规律及见效时间判断方法[J].中国石油大学学报(自然科学版),2011,35(6):95-98,111,5.

基金项目

国家科技重大专项课题(2011ZX05024-004:2011ZX05009-006) (2011ZX05024-004:2011ZX05009-006)

中国石油大学学报(自然科学版)

OA北大核心CSCDCSTPCD

1673-5005

访问量0
|
下载量0
段落导航相关论文