水资源与水工程学报2011，Vol.22Issue(6)：165-167,3.
利用VFP编程实现左右起点距及面积表生成
Generated the area table and distance from initial point by using VFP Program
王志保 1章鑫 1郭海峰 1汤建学 1谢海文 1谢运山1
作者信息
- 1. 江苏省水文水资源勘测局镇江分局,江苏镇江212003
- 折叠
摘要
Abstract
The paper introduced the situation of using the measured results to form the area table and distance from intial point based on the Visual Foxpro programming. In determining the starting point it major considered the relationships between water level and the two adjacent elevation. In the calculation of the area, the irregulat section of river was considered. After the identification, the results of the program is completely correct, among them the fraction of the starting point and area is determined by the new hydro-logical yearbook assembly ( can also be determined by the real). In addition through the application of calculation of the distance from initial point, the program can carriy out the intercept of section data so as to apply other engineering.关键词
VFP/河道横断面/起点距/面积表Key words
VFP/cross-section of river/distance from initial point/area table分类
信息技术与安全科学引用本文复制引用
王志保,章鑫,郭海峰,汤建学,谢海文,谢运山..利用VFP编程实现左右起点距及面积表生成[J].水资源与水工程学报,2011,22(6):165-167,3.
