中国机械工程2011，Vol.22Issue(17)：2084-2087,4.
喷射电沉积制备泡沫镍实验研究
Experimental Research on Jet Electrodeposited Porous Nickel
摘要
Abstract
A new nickel foam preparation method-jet electrodeposition was presented.This method was based on principle of high current density easily built porous dendrite deposition layer,the examples with simple sharp were prepared.Effects of the relevant process parameters such as electrolyte composition,current density and electrolyte jet speed on microstructure of the sample were studied.The results indicate that hole wall in porous electrodeposition layer is constituted by dendrite.the porosity of examples ranges from 30%~70%.the porosity of porous nickel increases with increasing in current density and decreasing in electrolyte jet speed.关键词
泡沫镍/喷射电沉积/孔隙率/电流密度Key words
porous nickel/jet electrodeposition/porosity/current density分类
金属材料引用本文复制引用
陈劲松,黄因慧,田宗军,刘志东..喷射电沉积制备泡沫镍实验研究[J].中国机械工程,2011,22(17):2084-2087,4.基金项目
国家自然科学基金资助项目（50575104) （）
淮海工学院自然科学基金资助项目（Z2009003) （）
