中国机械工程2011，Vol.22Issue(19)：2354-2359,6.
基于电化学加工方法的铝基超疏水表面制备技术研究
Study on Fabrication of Superhydrophobic Surface Substrate Based on ECM
摘要
Abstract
A new method of fabrication superhydrophobic surface by means of ECM was developed.The fabrication mechanism was based on the fact that the grain boundaries/dislocations were micro/nano-scale and more likely to be anodic dissolved than that of grain self,so the multi-scale micro/nano-structures surface can be generated by an applied electric field and the chemical solution.The relationship among processing quality,efficiency and conditions was studied in experiments herein.The results show that ECM can be used to fabricate dual-scale micro/nano-structures on aluminum surfaces,and further applied to generate the large size of superhydrophobic surface.The method is easier to control the reaction process than chemical etching meanwhile more economical than other techniques.After modified with low surface energy materials,the surface exhibits superhydrophobic property with water contact angle of 167° and tilt angle less than 3°.关键词
电化学加工/超疏水表面/微/纳米结构/晶界/位错Key words
electrochemical machining（ECM）/superhydrophobic surface/micro/nano-structure/grain boundary/dislocation分类
矿业与冶金引用本文复制引用
徐文骥,窦庆乐,孙晶,宋金龙,庞桂兵..基于电化学加工方法的铝基超疏水表面制备技术研究[J].中国机械工程,2011,22(19):2354-2359,6.基金项目
国家自然科学基金重大研究计划资助项目（90923022) （）
国家自然科学基金资助项目（50905020) （）
