中国机械工程2012，Vol.23Issue(3)：269-273,5.
切入磨削与纵向磨削的磨削力分析与比较
Analysis and Comparison of Grinding Forces between Plunge Grinding and Traverse Grinding
摘要
Abstract
Complex cylindrical grinding processes including both plunge grinding and traverse grinding were investigated.According to the traverse grinding characteristics,the grinding wheel was equivalent to a number of small wheels,a parabolic model for wheel wear was built based on the traditional steps model.The comparision formula of tangential grinding force was derived based on two tangential grinding forces of plunge grinding and traverse grinding the ratio of the tangential grinding force reflected tangential grinding varieties from the plunge grinding to the traverse grinding and was concerned with grinding coefficient,the wheel width and the traverse feed rate.The tangential grinding force was analyzed by the grinding wheel spindle power signals in experiments and the parabolic model is more realistic.Using force signals and power signals to monitor the complex grinding processes provides a reference method.关键词
切入磨削/纵向磨削/磨削力/功率信号Key words
plunge grinding/traverse grinding/grinding force/power signal分类
矿业与冶金引用本文复制引用
李厦,李郝林..切入磨削与纵向磨削的磨削力分析与比较[J].中国机械工程,2012,23(3):269-273,5.基金项目
上海市科学技术委员会科研基金资助项目(10DZ2292100) （10DZ2292100）
上海市教委重点学科建设资助项目(J50503) （J50503）
