中国机械工程2012，Vol.23Issue(3)：282-286,5.
基于B样条的高频比动平衡机的永久标定实现
Permanent Calibration Method Based on B-spline in High Ratio Balancing Machine
摘要
Abstract
An improved calibration method based on bicubic B spline interpolation was introduced,which can reduce errors as a result of ignoring rotor＇s inertia and system＇s damping and can achieve a permanent calibration both on hard bearing and soft bearing frame.Finally an experiment was setup to get calibration results and measurement results at several rotating speeds between 180～1423r/min on different rotors.After comparing measurement results from direct calibration results and interpolation calibration results,the effectiveness and veracity were proved.关键词
B样条插值/永久标定/动不平衡/状态标定Key words
B spline interpolation/permanent calibration/dynamic unbalance/state calibration分类
机械制造引用本文复制引用
赵鼎鼎,蔡萍..基于B样条的高频比动平衡机的永久标定实现[J].中国机械工程,2012,23(3):282-286,5.
