中国塑料Issue(1)：35-40,6.
PA6／ABS共混物性能研究
Study on Properties of PA6/ABS Blends
谭志勇 1李丹 1吴广峰 1刘庆辉 1阙盼1
作者信息
- 1. 长春工业大学化学工程学院,教育部合成树脂与特种纤维工程研究中心,吉林长春130012
- 折叠
摘要
Abstract
PA6/ABS blends were prepared by blending PA6 （polyamide 6） and ABS （acrylonitrile- butadiene-styrene） resins. The effect of the amount of ABS resins on the properties of PA6/ABS blends was investigated. And ABS/SAN blends with different rubber content were prepared by blending SAN resin （acrylonitrile-styrene copolymer） and ABS graft copolymer. The effect of rubber content in ABS/SAN biend on the properties of PA6/ABS blends was investigated. SAM resin （styrene-acrylonitrile-maleic anhydride copolymer） was introduced into the blends to replace part of SAN resin. The effect of SAM resin content on the properties of the blends was investigated. The results indicated that the blends with 50 %-60 % ABS resin showed optimum properties. The tensile strength, elastic modulus, bending strength and bending modulus of the blends decreased with the increase of rubber content in ABS/SAN blends. Tensile and bending performance of the blends first decreased, then increased with the increase of SAM resin content in SAN resin. But the melt flow rates of the blends decreased with the increase of SAM resin content. Difference of blending sequence with SAM resin showed little effect on mechanical properties of the blends.关键词
聚酰胺6/丙烯腈-丁二烯-苯乙烯共聚物/苯乙烯-丙烯腈-马来酸酐共聚物/力学性能/加工性能Key words
polyamide 6/acrylonitrile-butadiene-styrene copolymer/styrene-acrylonitrile-maleic anhydride copolymer/mechanical property/proccesability分类
化学化工引用本文复制引用
谭志勇,李丹,吴广峰,刘庆辉,阙盼..PA6／ABS共混物性能研究[J].中国塑料,2012,(1):35-40,6.
