中国塑料Issue(2)：33-36,4.
注射成型短碳纤维增强聚乙烯复合材料力学性能的研究
Study on Mechanical Properties of Injection Molded Short Carbon Fiber Reinforced Polyethylene Composites
徐先锋 1胡艳艳 1敖学东1
作者信息
- 1. 华东交通大学机电工程学院,江西南昌330013
- 折叠
摘要
Abstract
Samples of polyethylene/short carbon fiber composites were prepareo via injection molding. The tensile strength, hardness, and elastic modulus of the composites were studied. It showed that with increasing content of carbon fiber, the tensile strength, hardness, and elastic modulus of the composites increased. When carbon fiber content was lower than 3. 3%, these properties increased linearly; when carbon fiber content was higher than 3.3%, these properties increased significantly.关键词
碳纤维/聚乙烯/复合材料/增强/注射成型Key words
carbon fiber/polyethylene/composite/reinforcement/injection molding分类
化学化工引用本文复制引用
徐先锋,胡艳艳,敖学东..注射成型短碳纤维增强聚乙烯复合材料力学性能的研究[J].中国塑料,2012,(2):33-36,4.
