铸造技术2011，Vol.32Issue(11)：1539-1542,4.
无铅易切削镁钙黄铜的组织结构与性能
Microstructure and Properties of Free Cutting Pb-free Mg-Ca Brass
摘要
Abstract
The free cutting Pb-free Mg-Ca brass was fabricated using medium frequency induction furnace. The microstructure of the alloy was analyzed using SEM and XRD. The hardness was measured by a Brinell hardness tester and cutting properties were studied by lathe. The results show that a-phase, p-phase and Cu2Mg phase exist in the alloy. With the increase of magnesium content, the Cu2Mg particles increas. The hardness of the brass increases as Mg content increases, as the Mg content exceed 1.5(wt.) % , the hardness increasing is not so obviously. The cutting property of the brass can be improved by the addition of Mg.关键词
无铅黄铜/易切削黄铜/切削性能Key words
Pb-free brass/ Free-cutting brass/ Cutting properties分类
矿业与冶金引用本文复制引用
梅虎,戴品强,陈文哲,陈永禄..无铅易切削镁钙黄铜的组织结构与性能[J].铸造技术,2011,32(11):1539-1542,4.基金项目
福建省产学重大专项(2010H6001) （2010H6001）
