分析测试学报2012，Vol.31Issue(3)：327-331,5.DOI:10.3969/j.issn.1004-4957.2012.03.016
蒸压硅酸盐制品水化产物的结晶度分析
Measurement on Hydrate Products Crystallinity Degrees of Autoclaved Silicate Products
摘要
Abstract
The relationships of solid waste autoclaved samples compressive strength and their crystal-Unity degrees, hydrate amounts were studied with dissolved amount difference and bound water a-mount measured with loss on ignition and acid digestion method. The results showed that the crystal-linity degrees of autoclaved samples, such as fly ash, waste glass and waste concrete are in a low level except that the crystallinity degree of autoclaved steel slag sample is higher. The dissolved amount difference, bound water amount and crystallinity degree of the autoclaved samples were related to their hydrate types. The crystallinity degrees of autoclaved samples could be indirectly represented as the ratios of well-crystallized hydrate amounts to total hydrate amounts in the autoclaved samples, and used to determine the autoclaved schedule and guide the technology optimization for autoclaved products. There is a reasonable crystallinity degree range for the compressive strength of autoclaved samples.关键词
固体废物/蒸压硅酸盐制品/结合水/溶出差/结晶度/水化产物Key words
solid waste/ autoclaved silicate products/ bound water amount/ dissolved amount difference/ crystallinity degree/ hydrate product分类
数理科学引用本文复制引用
柯昌君,王淑英,王浩,袁兵..蒸压硅酸盐制品水化产物的结晶度分析[J].分析测试学报,2012,31(3):327-331,5.基金项目
湖北省教育厅科学技术研究项目(D20111308) （D20111308）
