中国造纸2012，Vol.31Issue(1)：23-27,5.
超声波强化Fenton试剂深度处理制浆中段废水
Advanced Treatment of Pulping Effluent by Ultrasonic Strengthened Fenton Process
莫立焕 1周志明 2王玉峰1
作者信息
- 1. 华南理工大学制浆造纸工程国家重点实验室
- 2. 华南理工大学广东省造纸技术与装备公共实验室,广东广州,510640
- 折叠
摘要
Abstract
The treatment tif pulping effluent by ultrasonic strengthened Fenton process was carried out. Based on the orthogonal test and single factor test, the effects of every main factor on color and CODcr removal rate were investigated. The results showed that the removal rates of color and CODcr of the effluent are 91. 3% and 69. 2% under the conditions as ultrasonic frequency of 28 kHz, output power of 1000 W, initiate pH value of the effluent is 3.0, treatment time is llmin and concentrations of Fe2+ and H2O2 are 50 mg/L and 0.9 mg/L respectively.关键词
超声波/Fenton试剂/制浆中段废水Key words
ultrasonic/Fenton reagent/pulping medium wastewater分类
资源环境引用本文复制引用
莫立焕,周志明,王玉峰..超声波强化Fenton试剂深度处理制浆中段废水[J].中国造纸,2012,31(1):23-27,5.
