中国造纸2012，Vol.31Issue(1)：45-48,4.
烟草薄片型卷烟纸的制备及性能研究
Cigarette Paper Based on Tobacco Sheet: Its Preparation and Properties
摘要
Abstract
Tobacco stem was used to make pulp with chemimechanical pulping (CMP) process. The pulp was mixed with small amount of lignocellulosic fiber and used to make cigarette paper based on tobacco sheet. The obtained base paper was converted to be a cigarette paper by further coating with the extractives from tobacco stem. The physical properties and smoking quality of the paper were tested. According to the physics indexes (tensile strength, air permeability, etc. ) requirement of cigarette paper and the optimization of beating experiment, the ratio of the materials and the optimal beating degree of the materials were as following: tobacco stem pulp 75% , 35°SR; unbleached softwood 20% , 80°SR; bleached hardwood 2.5% , 40°SR; bleached cannabis 2. 5% , 70eSR. Under the condition, the tensile strength, air permeability and elongation of the cigarette paper were about 39.67 N-m/g, 10.21 n,m/(Pa-s) and 1.41 % respectively. Moreover, the results of smoking test of the cigarette paper baaed on tobacco sheet indicated that the woody odor and stimulation reduced, the quality was improved obviously compared with the normal cigarette paper.关键词
烟草薄片/卷烟纸/抗张强度/透气度/评吸Key words
tobacco sheet/cigar wrapper tobacco/tensile strength/air permeability/smoking分类
轻工纺织引用本文复制引用
安瑞,谢益民,王磊,王凤兰,姚元军..烟草薄片型卷烟纸的制备及性能研究[J].中国造纸,2012,31(1):45-48,4.基金项目
国家自然科学基金(30871996,31070521)项目. （30871996,31070521）
