噪声与振动控制2012，Vol.32Issue(1)：39-42,4.DOI:10.3969/j.issn.1006-1355-2012.01.009
光学元件的模态分析与模型修正
Modal Analysis and Model Updating of Optical Element
摘要
Abstract
To study the dynamic performance of optical elements, the modal experiment for an optical mirror mount was carried out as an example. Its dynamic computation model was established and its reliability was verified. And the modal analysis was done. To reduce the deviation between the theoretical model and practical situation, the dynamic computation model was updated from time to time by analyzing the relative sensitivity of the frequency to the model parameters such as material property, Poisson ratio, elastic modulus, geometrical dimensions and so on. Then the most sensitive parameter was found, and the model was updated according to this parameter. It is found that the dynamic characteristics of the updated model is closer to the measurement data, and the frequency deviation between the simulation and measurement is obviously reduced. Results show that the dynamic computation model is capable for describing the dynamic characteristics of the optical elements.关键词
振动与波/模态分析/模型修正/灵敏度/抗振Key words
vibration and wave/modal analysis/model updating/sensitivity/vibration resistant分类
机械制造引用本文复制引用
邵珺,叶景峰,胡志云,张振荣,黄梅生..光学元件的模态分析与模型修正[J].噪声与振动控制,2012,32(1):39-42,4.基金项目
国家重点实验室SKLLIM0905 （）
