铸造2012，Vol.61Issue(1)：105-108,4.
圆锥破碎机CH660下壳体铸造工艺研究
Casting Process of Steel Casting of Bottom Shell for Cone Crusher CH660
陆亦工 1岳先才2
作者信息
- 1. 新疆工业高等专科学校,新疆乌鲁木齐830091
- 2. 无锡市铸造有限公司,江苏无锡214115
- 折叠
摘要
Abstract
Cone crusher shell is a kind of large steel casting that has complicate shape and high quality requirements. Through the analysis on its structure, resin-bonded sand mold, insulating riser and the internal and external chills were adopted after the simulation verification by the CAE/InteCAST. Finally the bottom shell of cone crusher CH660 was produced successfully by fast pouring and normalizing plus tempering treatment. The result shows that the dimensional precision, the mechanical performance and the surface roughness are satisfying. The detection test and practical validation results after being installed in a motor factory show that the performance of the casting satisfies the requirement, which established foundations for the mass production of the casting.关键词
破碎机壳体/大型铸钢件/铸造工艺/模拟验证Key words
crusher shell/ large steel castings/ foundry process/ simulation verification分类
矿业与冶金引用本文复制引用
陆亦工,岳先才..圆锥破碎机CH660下壳体铸造工艺研究[J].铸造,2012,61(1):105-108,4.
