铸造技术2012，Vol.33Issue(3)：351-354,4.
DISA造型线生产带盘的轴类零件均衡凝固铸造工艺优化设计
Proprtional Solidification Processs for Shaft Parts with Plate in DISA Molding Line
黄党怀 1吴照勇 1张勇权 1黄长永 2陈士斌2
作者信息
- 1. 普什铸造有限公司,四川宜宾645152
- 2. 重庆凯施特模具,重庆400042
- 折叠
摘要
Abstract
The axis iron castings with plate were cast in vertical parting and squeeze molding line without flask, 12 pieces per cavity. The pouring system was designed applying proportional solidification theory and adopting equal flow rate. Under promising transmitting path smooth, inside irrigating path thickness is 3 mm, setting exhaust slot for strengthening. After production validates, the mass production of the axis iron castings were successful completed.关键词
带盘的轴类铸件/DISA生产线/均衡凝固理论/浇注系统设计Key words
axis casting with plate/ DISA production line/ proportional solidification theory/ pouring system design分类
金属材料引用本文复制引用
黄党怀,吴照勇,张勇权,黄长永,陈士斌..DISA造型线生产带盘的轴类零件均衡凝固铸造工艺优化设计[J].铸造技术,2012,33(3):351-354,4.
