复合射孔爆炸与燃烧机理数值模拟分析OA北大核心CSCDCSTPCD
Numerical Simulation on Explosion and Combustion Mechanism of Composite Perforation
为了研究复合射孔爆炸与燃烧机理,建立了复合射孔有限元模型,利用LS_DYNA软件对模型进行了显性动力学数值计算,得出了射孔弹爆炸后枪身内产生的压力、温度分布情况.射孔弹爆炸后枪身内的压力和温度呈非均匀分布;时间越长、距起爆点距离越远时,冲击波、稀疏波在空气介质中形成的压力值越小.对弹间火药进行了冲击敏感性实验和热点火实验,在实验基础上,联系数值分析结果确定了枪身内火药的点火方式.通过实验得出弹间火药的热点温度在300~350℃之间;冲击敏感性为2…查看全部>>
To study the mechanism of explosion and combustion of gunpowder inside the composite perforation, set up is the finite element model of composite perforation, based on which the dominance dynamic numerical calculation about the model is done by LS_DYNA software. Then the uneven distribution of pressure and temperature in the perforators is obtained after the shaped charge explosion. The longer the time span, the further the distance from initiation point, th…查看全部>>
刘会娟;刘荫忠;田毅;李刚强;徐波
西安通源石油科技股份有限公司,陕西西安710075西安通源石油科技股份有限公司,陕西西安710075西安通源石油科技股份有限公司,陕西西安710075西安通源石油科技股份有限公司,陕西西安710075西安通源石油科技股份有限公司,陕西西安710075
军事科技
复合射孔LS_DYNA软件燃烧速度耦合作用爆炸燃烧
composite perforationLS_DYNA softwarecombustion velocitycoupling action,explosioncombustion
《测井技术》 2012 (1)
78-83,6
评论