| 注册
首页|期刊导航|高电压技术|1MV/100kA快脉冲直线型变压器驱动源装置设计

1MV/100kA快脉冲直线型变压器驱动源装置设计

陈林 邹文康 谢卫平 周良骥 王勐

高电压技术2012,Vol.38Issue(4):935-940,6.
高电压技术2012,Vol.38Issue(4):935-940,6.

1MV/100kA快脉冲直线型变压器驱动源装置设计

Design of the 1 MV/100kA Fast Linear Transformer Driver Generator

陈林 1邹文康 1谢卫平 1周良骥 1王勐1

作者信息

  • 1. 中国工程物理研究院流体物理研究所,绵阳621900
  • 折叠

摘要

Abstract

Fast linear transformer driver(LTD) is a new pulsed power technology that can directly produce fast pulse with rise time less than 100 ns which could be widely used in Z-pinch,radiography,high power microwave and some other research fields.To master the design techniques of LTD,we designed a 1 MV/100 kA fast LTD generator on the basis of 100 kV/100 kA-LTD stage prototype which had been constructed and tested successfully.The generator consists of 10 LTD stages connected in series,and the stored energy is 20 kJ.The outer diameter of the generator is about 1.5 m,at a length of 2.2 m.According to the equivalent circuit simulation,the generator can deliver 1.08 MV fast pulse in 51 ns with 168 ns FWHM into a 10 Ω load.The magnetically insulated transmission line(MITL) geometries of LTD with tapered and straight center conductors was simulated by PIC code.It is shown that the output voltage and the resistance are 1 MV and 10 Ω for both two geometries,respectively.The electron flow in the gap of coaxial transmission line can be magnetically insulated.

关键词

快脉冲直线型变压器驱动源(LTD)/电路模拟/PIC模拟/磁绝缘传输线/多间隙开关/输出电压/功率流

Key words

fast linear transformer driver(LTD)/circuit simulation/particle-in-cell(PIC) simulation/magnetically insulated transmission line/multi-gap switch/output voltage/power flow

分类

信息技术与安全科学

引用本文复制引用

陈林,邹文康,谢卫平,周良骥,王勐..1MV/100kA快脉冲直线型变压器驱动源装置设计[J].高电压技术,2012,38(4):935-940,6.

基金项目

国家自然科学基金 ()

高电压技术

OA北大核心CSCDCSTPCD

1003-6520

访问量0
|
下载量0
段落导航相关论文