摘要
Abstract
The paper presents the hardware and software design of a celerity control prototype, and develops this prototype objected on the servo mechanism. The design, employing DAQ circuit board from NI Company, can implemem the control arithmetic in the LabVIEW graphic interface. By FPGA CMOS chip of the card, it produces the lime sequence logics through the hardware interfaces which include AD/ DA, DIO and its hus communication. Based on the above principles, it has connected electrically the prototype and the controlled object. Via programming the drivers, it has carried out the access to DAQ card from the computer applications.关键词
快速控制原型/半实物仿真系统/寄存器级驱动Key words
rapid control prototyping/hardware-in-the-loop simulation/register-level program分类
武器工业
