机械科学与技术2012，Vol.31Issue(5)：708-712,5.
锆管砂带磨削试验研究
Experimental Research on the Abrasive Belt Grinding of Zircaloy Tube
摘要
Abstract
Because of special rationalized performances of Zircaloy grinding,using conventional grinding technology will bring about the grinding hot and the workpiece to surface burning,but the abrasive belt has mush characteristics,for example,the grinding temperature is much low and the workpiece of surface is not easy to be burned,so it is called as ＂cold grinding ＂.This article adopts three different abrasive belts doing experimental process about zirconium tube,observing the workpiece of the standard of material removal rate,the surface roughness and the surface of the worn belt after grinding,and finding out which is most suitable for the abrasive belt grinding of Zircaloy tube.The professional graphic processing software Image-Pro Plus is used to process and calculate the pictures that are collected by the camera for analyzing the situation of belt plug.Also,the influence of belt speed on the standard material removal rate is investigated,when the belt speed is 12 m/s with the experiment,the material removing efficiency achieves maximum value,and the belt wear is more reasonable.关键词
砂带磨削/标准材料切出率/表面粗糙度/砂带磨损Key words
belt grinding/material removal rate/surface roughness/belt wear分类
矿业与冶金引用本文复制引用
黄云,张美,黄智,张磊,郭强..锆管砂带磨削试验研究[J].机械科学与技术,2012,31(5):708-712,5.基金项目
重庆市科委科技计划项目公关项目（CSTC2007AB3004）资助 （）
