中国塑料Issue(3)：57-61,5.
原位增容PA6／PE—HD共混物的性能研究
Research on Properties of In-situ Compatibilized PA6/PE-HD Blends
王忠强 1胡国胜2
作者信息
- 1. 东莞信诺橡塑工业有限公司,广东东莞523850／中北大学高分子与生物工程研究所,山西太原030051
- 2. 中北大学高分子与生物工程研究所,山西太原030051
- 折叠
摘要
Abstract
polyamide 6 （PA6）/high density polyethylene （PE-HD） blends were prepared via in-situ compatibilized reactive extrusion using a twin screw extruder. The reactive compatibilization of PA6/PE-HD blends as well as the effect of content changes of PE-HD on mechanical properties of PA6/PE-HD blends were studied through mechanical property test, SEM, and Molau. The experimental results showed that PE-HD-g-MAH was formed during the blending extrusion, which provided a good compatibilization on PA6/PE-HD blends.. Mechanical property and interracial morphology of PA6/PE-HD blends were improved obviously, meanwhile the water absorption decreased.关键词
聚酰胺6/原位增容/力学性能/高密度聚乙烯Key words
polyamide 6/in-situ compatibilization/mechanical property/high density polyethylene分类
化学化工引用本文复制引用
王忠强,胡国胜..原位增容PA6／PE—HD共混物的性能研究[J].中国塑料,2012,(3):57-61,5.
