郑州大学学报（工学版）2012，Vol.33Issue(2)：51-54,4.DOI:10.3969/j.issn.1671-6833.2012.02.013
基于MATLAB/Simulink的燃烧过程控制系统仿真
Simulation of Combustion Process Control System Based on Matlab/Simulink
摘要
Abstract
Through simulation software Matlab/Simulink, this paper gets the PID controller parameters of fuel flow, steam pressure and air flow control system by using the method of Ziegler-Nichols, establishes the simulation model of combustion process control system. Simulation results show that if the fuel flow and air flow are disturbed by chip signal, steam pressure maximum overshoot is 0. 36% , and the response time is 46. S s,stability and response speed of control system are quite good. MATLAB/Simulink software provides an effective way for the analysis and evaluation study of combustion process control system.关键词
燃烧过程控制系统/MATLAB/Simulink/系统仿真Key words
combustion process control system/ Matlab/Simulink/ system simulation分类
信息技术与安全科学引用本文复制引用
周俊杰,房全国,王定标..基于MATLAB/Simulink的燃烧过程控制系统仿真[J].郑州大学学报（工学版）,2012,33(2):51-54,4.基金项目
河南省重大公益性科研项目(081100910100) （081100910100）
河南省自然科学研究计划项目(2011A480004). （2011A480004）
