环境工程学报2012，Vol.6Issue(6)：2093-2096,4.
废环氧树脂/PVC复合材料的性能
Properties of waste epoxy/PVC composites
摘要
Abstract
The composite material is produced by waste epoxy. By orthogonal test, the influence order compression molding with polyvinyl chloride（PVC） and of addition of epoxy, dosage of silane coupling agent （KH-550） , pressing time on the mechanical properties of composite material was analyzed and the optimal conditions of orthogonal experiment were also determined. Moreover, effects of the content of epoxy, the dos- age of silane coupling agent, and the pressing time on the mechanical properties of composite material were dis- cussed and the most optimized qualifications were confirmed. The results showed that when the pressing time was 10 min, the addition of epoxy was 70% and the dosage of silane coupling agent was 2 portions, the com- posite material had optimal performance, with the impact strength of 10.49 kJ/m2 and the tensile strength of 62.24 MPa.关键词
废环氧树脂/正交实验/聚氯乙烯/性能Key words
waste epoxy/orthogonal experiment/polyvinyl chloride (PVC)/property分类
资源环境引用本文复制引用
杨文涛,陆书玉,许文娇,林芝,罗丽娟..废环氧树脂/PVC复合材料的性能[J].环境工程学报,2012,6(6):2093-2096,4.基金项目
上海市科委基金资助项目 （）
