南京航空航天大学学报2012，Vol.44Issue(z1)：37-41,5.
飞机装配铣削制孔和钻孔技术对比分析
Comparing Analysis of Milling and Drilling Holes For Aircraft Assembly
朱春燕 1蒋红宇 1张烘洲1
作者信息
- 1. 上海飞机制造有限公司航空制造技术研究所,上海,200436
- 折叠
摘要
Abstract
The aircraft milling and drilling technologies are compared and analyzed with at least 5 mm diameter holes. The oribital milling technology has more important advantages than the drilling technology. The pratical value of oribital milling in the assembly of aircraft parts is proposed. Furthermore , the effect of minimum quantity lubricant (MQL) technology in drilling process is proved by test.关键词
飞机装配/铣孔/钛合金/微量润滑Key words
aircraft assembly/ milling hole/ Ti alloy/ minimum quantity lubricant (MQL)分类
航空航天引用本文复制引用
朱春燕,蒋红宇,张烘洲..飞机装配铣削制孔和钻孔技术对比分析[J].南京航空航天大学学报,2012,44(z1):37-41,5.
