石油钻采工艺2012，Vol.34Issue(3)：91-93,3.
底水油藏注水开发水淹模式探讨
Discussion on flooding pattern for bottom water reservoirs driveling by water-injection
摘要
Abstract
In the development of bottom water reservoirs, a large part of oil wells were water-flooded by bottom water coning. Whether the additional pressure caused by water injection could prevent the water coning are always the problem that petroleum engineers cares about most. After analyzing of the oil wells production dynamical performance and the geological characteristics of some bottom water reservoir located in northwest China, the numerical simulation technology; streamline simulation technology and virtual tracer simulation technology was adopt to analyze the reasons for inefficacy of water flooding treatment in this reservoir. Through analysis, we found out that most injected water flow to the bottom water area first, and then drive the bottom water flowing to the bottom of oil wells. At the same time, production wells displays obviously bottom water coning characteristic. The flooding path of injected water indicates that, in the bottom water reservoirs, bottom water coning cannot be restrained by maintaining reservoir pressure due to artificial water injection.关键词
底水油藏/水淹模式/锥进/数值模拟Key words
bottom water reservoir/ water flooding mode/ coning/ numerical simulation分类
能源科技引用本文复制引用
程秋菊,冯文光,彭小东,刘鑫..底水油藏注水开发水淹模式探讨[J].石油钻采工艺,2012,34(3):91-93,3.基金项目
国家科技重大专项"裂缝型复杂介质油藏数值模拟技术研究"(编号:2011ZX05014-004-004HX). （编号:2011ZX05014-004-004HX）
