湖南工业大学学报2012，Vol.26Issue(2)：49-55,7.
面齿轮传动齿面几何特征与接触应力关系
The Relationship of Tooth Surface Geometry and Contact Stress for Face-Gear Driving
摘要
Abstract
Studies the principal curvature and the main direction of point contact face-gear driving, as well as the two main values of induced normal curvature for face-gear driving, discusses the factors affecting the curvature of tooth and tooth surface induced normal curvature, and conducts simulation analysis on the influences which the tooth surface contact stress distribution and the main geometric parameters have on the contact stress. The results show that the geometric features of tooth surface have a major impact on the performance of face-gear driving, and in order to reduce the contact stress of tooth surface, it should use more teeth, larger modulus, larger pressure angle and smaller tooth number difference in the application of face-gear drive.关键词
面齿轮/齿面曲率/齿面诱导法曲率/齿面接触应力Key words
face-gear/tooth surface curvature/induced normal curvature/tooth surface contact stress分类
机械制造引用本文复制引用
任行丽,何国旗,舒陶亮..面齿轮传动齿面几何特征与接触应力关系[J].湖南工业大学学报,2012,26(2):49-55,7.基金项目
国家重点基础发展计划（“973”计划）基金资助项目（2011CB706800）,湖南省大学生研究性学习和创新性实验计划基金资助项目（湘教通[2011]123号）,湖南工业大学大学生研究性学习和创新性实验基金资助项目 （）
