| 注册
首页|期刊导航|材料工程|FGH96合金热挤压棒材超塑性研究

FGH96合金热挤压棒材超塑性研究

王淑云 张敏聪 东赟鹏 刘趁意 陈由红 孙兴

材料工程Issue(7):24-28,5.
材料工程Issue(7):24-28,5.

FGH96合金热挤压棒材超塑性研究

Study on Superplasticity of Extruded FGH96 Alloy

王淑云 1张敏聪 1东赟鹏 1刘趁意 1陈由红 1孙兴1

作者信息

  • 1. 北京航空材料研究院,北京100095
  • 折叠

摘要

Abstract

The superplasticity of extruded FGH96 alloy was studied. The results show that the extruded FGH96 alloy exhibits excellent superplasticity at temperatures of 1050℃ and 1100℃. Superplastic elongation rate reaches 405% and flow stress is decreased to 32MPa at temperature of 1100℃ with the initial strain rate of 3. 33 × ℃-4s-1. The metallographic analysis indicates that the relatively large size of γ' phase and the large distance between different γ' phases in FGH96 alloy can promote dynamic re-crystallization, and the grain growth can be restrained in the subsequent deformation. Evident dynamic recrystallization in FGH96 alloy has been occurred during the extrusion deformation. But due to the insufficient dynamic recrystallization in extrusion deformation, a large quantity of substructures still exists in the interior of the grain. The unstable substructures would cause finer, stable and uniform grains, the mean size of which is about 10μm, through dynamic recovery and dynamic recrystallization in superplastic deformation, thus resulting in excellent superplasticity of FGH96 alloy.

关键词

FGH96合金/挤压/超塑性

Key words

FGH96 alloy/ extrusion/ superplasticity

分类

矿业与冶金

引用本文复制引用

王淑云,张敏聪,东赟鹏,刘趁意,陈由红,孙兴..FGH96合金热挤压棒材超塑性研究[J].材料工程,2012,(7):24-28,5.

材料工程

OA北大核心CSCDCSTPCD

1001-4381

访问量0
|
下载量0
段落导航相关论文