机械科学与技术2012，Vol.31Issue(7)：1079-1084,6.
三维打印技术工艺参数对制件表面形貌的影响
The Influence of 3DP Processing Parameters on the Parts＇ Surfact Topography
摘要
Abstract
Three-dimensional printing （3DP） as an important solid free from tabrication （3FF） tecnnology he- comes popular due to rapid prototyping, no pollution, and high productivity. Based on the experiment platform of ZP310, in this paper, the influence of print parameters of the location of parts, power thickness and saturation level on the parts surface topography and accuracy were investigated. The full factorial experimental method was used to obtain the rectangular parts which were made with different print parameters. Finally, all parts＇ surface topography was measured by profiler. The results show that the best surface topography can be obtained at the parametrical set- ting of power thickness 0.1 mm and saturation level 70% as the parts are placed on the left of manufacturing room.关键词
三维打印技术/表面形貌/打印参数/固体无模成型Key words
3DP/surface topography/print parameters/SFF分类
机械制造引用本文复制引用
曹珊,李淑娟..三维打印技术工艺参数对制件表面形貌的影响[J].机械科学与技术,2012,31(7):1079-1084,6.基金项目
国家973项目（2009CB724406）和陕西省工业攻关项目（2012K07-25）资助 （）
