起重运输机械Issue(5)：4-10,7.
基于ADAMS的卸船机虚拟样机仿真分析
ADAMS-based simulation analysis of virtual prototype for ship unloader
摘要
Abstract
Based on MSC ADAMS software and the standard of Crane Design Specification, this paper performs mechanical kinetics simulation analysis for the operation of ship unloader, describes the load carrying capacity of key components and joints in detail under three typical conditions and finds out the components which require special attention according to the complexity and change of load.关键词
卸船机/虚拟样机/机械动力学Key words
ship unloader/ virtual prototype/ mechanical kinetics分类
交通工程引用本文复制引用
姚文庆,许海翔,刘华..基于ADAMS的卸船机虚拟样机仿真分析[J].起重运输机械,2012,(5):4-10,7.基金项目
国家质检公益行业项目《起重机安全保护装置性能测试技术及装备研究》和《起重机械虚拟试验验证与安全评估技术研究》资助 （）
