电工技术学报2012，Vol.27Issue(6)：69-76,8.
大功率电机直接起动的逆变器控制模式切换策略
Control Model Switching Strategy for High-Power Motor Direct Starting in Inverter
摘要
Abstract
For ensuring reliable operation of high power inverter happening in load shocking （such as short circuit）, two kinds of control modes are introduced in this paper. Controlling the output voltage in normal operation constantly is named the voltage control mode （VCM）, and controlling the output current constantly in abnormal operation conditions （such as short circuit） is named the current control mode （CCM）. The switching model between VCM and CCM becomes one of key technologies. The traditional method is used to switch into CCM, when load current exceedsd the current threshold, and it switches into VCM once the load voltage rises to the rates value after the short circuit eliminating. However, for starting the high-power motor with specific load, it is necessary to set a high current threshold to prevent in CCM because of the high motor starting current. Nevertheless, for the reliable protection of breakdown, such as short circuit, the current threshold is expected to be small. To solve this contradiction, improved method determines the switching condition according to current threshold and voltage threshold. Experimental results validate the proposed control strategy using two 400kV · A parallel inverters.关键词
LCL滤波器/状态反馈/极点配置/电机直接起动/电流阈值/电压阈值/电压控制模式/电流控制模式Key words
LCL filter/state feedback/pole assignment/motor direct starting/current threshold/voltage threshold/voltage control model/current control model分类
信息技术与安全科学引用本文复制引用
李涛丰,汪洪亮,康勇,裴雪军..大功率电机直接起动的逆变器控制模式切换策略[J].电工技术学报,2012,27(6):69-76,8.基金项目
国家自然科学基金重点资助项目 （）
