电焊机2012，Vol.42Issue(7)：61-64,4.
Al2O3/Cu复合材料制备工艺的优化
Optimizational processes of manufacturing Al2O3/Cu matrix composite by resistance welding
包晔峰 1沈恒龙 1朱志华 1杨可1
作者信息
- 1. 河海大学机电工程学院,江苏常州 213022
- 折叠
摘要
Abstract
The service life of resistance spot welding electrode is short when welding galvanized steel.For extending the life of resistance spot welding electrode,particle-reinforced copper matrix composites electrode materials,especially Al2O3/Cu composites electrode materials have got people's attention.ln ordeT to obtain the best process parameters,in this paper,Al2O3/Cu composite electrode materials was prepared by powder metallurgy.Taking density,Vickers hardness,conductivity and microstructure as the evaluation contents,research on mechanical properties and microstructure of Al2O3/Cu composite electrode materials influenced by pressing force and sintering temperature are done by changing the process parameters.The result was as followed:The best process parameters are obtained that the pressing force is 100 kN and sintering temperature is 940℃.关键词
Al2O3/Cu复合电极材料/密度/显微维氏硬度/电导率/显微组织Key words
AlO3/Cu composite electrode materials/density/Vickers hardness/conductivity/microsturcture分类
矿业与冶金引用本文复制引用
包晔峰,沈恒龙,朱志华,杨可..Al2O3/Cu复合材料制备工艺的优化[J].电焊机,2012,42(7):61-64,4.
